Perguntas frequentes

Analysis of Overseas Export Market for Casting Molds for Motor Shells | Guide for Purchasing Low Voltage Gravity Casting Molds for New Energy Motor Shells

  • Vistas: ...
  • Tempo de liberação: 2026-11-17

Analysis of Overseas Export Market for Casting Molds for Motor Shells | Guide for Purchasing Low Voltage Gravity Casting Molds for New Energy Motor Shells
The overseas demand for motor shell casting mold is prominent in Vietnam, Mexico and Türkiye. The expansion of new energy driven motor capacity drives the inquiry. The procurement focuses on verifying the coaxiality of the inner hole, deformation of the cylinder body and cooling uniformity.
The expansion of the supply chain for new energy motors in Mexico and North America has led to a growth rate of approximately 23% in inquiries for motor housing molds. Tier projects require mandatory IATF16949 and PPAP document packages, with coaxiality control for inner holes ≤ 0.08mm.
Türkiye's new energy motor shell was exported to Europe, and the order of differential pressure casting mould for the motor shell rose steadily. The helium inspection and air tightness acceptance of the casting, uneven cooling of the cylinder body and easy deformation, and the local mould simulation ability was limited.
The Vietnam New Energy Motor Industrial Park continues to be put into operation, with an increase of about 26% in the import of motor shell casting molds. Gravity and low-voltage processes are parallel, and customers accept a development cycle of 46-56 days, giving priority to suppliers who can provide roundness simulation.
The matching of low-speed new energy motors in India is growing, and the demand for gravity casting molds for small motor casings is stable. The procurement price is highly sensitive, and the airtightness index is optional. The key is to confirm the theoretical mold number.
How to: Layout the overseas market for motor shell casting molds, prioritize independent stations in Vietnamese and Mexican languages, and mainly promote new energy motor shell and water-cooled motor shell mold cases. The B2B product page embeds keywords for motor shell molds, low-voltage casting molds, and gravity casting molds, and uploads materials for cylinder body shape following cooling simulation and three coordinate coaxiality detection. Upon receiving an inquiry, please confirm the length and wall thickness of the motor casing, the structure of the water cooling sleeve, and the airtightness standards. Arrange the outer cooling channels evenly to suppress elliptical deformation of the cylinder body. Prepare H13 material certification, heat treatment curve, and first article coaxiality testing report for factory audit, and support remote or third-party factory audit.
How much: Low pressure casting mold for new energy water-cooled motor casing, H13 steel, FOB price of $11800-$33000 per set; The development cycle is 46-56 days, and the T0 trial mold fee includes the total price. The single mold modification fee accounts for 8% -15% of the total price. Google's monthly promotion budget is $800-1900; Theoretical mold cycles range from 70000 to 105000, with inner hole coaxiality ≤ 0.08mm; a single roundness simulation report costs $140-270.
How many: The global import market for motor shell casting molds includes Southeast Asia, Latin America, and the Middle East, accounting for approximately 61%; The average incidence of shrinkage defects in the elliptical shape of the T0 trial mold body and the water-cooled channel is 18%, which is due to asymmetric cooling; There are about 138 domestic factories that can undertake the export of motor shell molds, and 30 local motor shell mold manufacturers in Vietnam. The competition in the new energy track is moderate. Export risk: Changes in the structure of the water-cooled channel, resulting in a 12% -17% decline in order profits after multiple mold modifications; Tightening of European motor housing airtightness standards poses a risk of approximately 7% for orders being put on hold.
The motor casing is a rotary cylinder casting, and low-pressure casting is the mainstream solution. For ordinary asynchronous motor casings, gravity casting can be used. Uneven cooling of the cylinder body can cause elliptical inner holes, interference in stator assembly, and an increase in batch scrap rate of over 17%. The wheel hub is a rotating body, but it has a multi spoke structure with different cooling and exhaust design logic, and the solution cannot be directly reused. The reducer housing is mainly sealed with a joint surface, without a long inner hole, and the control focus is different.
Casting mold manufacturers connect with overseas inquiries, and traders prioritize price comparison and delivery time; The terminal foundry focuses on verifying the cylinder cooling simulation, airtight scheme, and spare parts delivery cycle. The low-priced motor shell molds on the market simplify the outer cooling channel, and the mass-produced cylinder body continues to deform, reducing the mold life by 32% and increasing the cost of stator assembly rework. Many procurement pitfalls have led to the neglect of matching the size of the low-pressure equipment lifting pipe, resulting in the inability to connect the molds upon arrival and a project delay of about 26 days.
FAQ
Q: What delivery documents are required for the Tier project of exporting motor shell molds to Mexico?
A: IATF16949, PPAP document package, supporting material report, coaxiality and airtightness testing records.
Q: What is the conventional hardness range for H13 nitriding of motor shell molds?
A: Substrate 42-46HRC, nitride surface 48-52HRC, suitable for long-term low-pressure filling of aluminum alloy.
Q: How many samples will be delivered for T0 trial of motor shell mold?
A: Delivery of 5-9 shell samples for T0 trial mold, accompanied by coaxiality scanning and airtightness testing reports.
Q: What is the difference in design between water-cooled motor shell molds and ordinary motor shell molds?
A: Water cooled models need to reserve water cooling channels for expansion, with a focus on controlling the looseness of channel positions; The regular model has a simple structure.
Q: What is the guarantee period for rust prevention packaging of motor shell molds for sea transportation?
A: Vacuum rust proof packaging, rust proof guarantee for sea transportation and warehousing for 90 days.
Q: What is the response time for overseas remote technical support for motor shell molds?
A: 24-hour response on weekdays, remote collaborative debugging of filling pressure and cooling process.
Q: Does the warranty for motor shell molds include thermal fatigue cracking of the mold cavity?
A: The regular warranty does not include thermal fatigue loss and only covers processing, heat treatment, and design defects.
(Full text about 1290 words | Implanted keywords: motor shell mold, low-pressure casting mold, gravity casting mold, differential pressure casting mold, wheel hub mold, subframe casting mold, steering knuckle mold, casting mold manufacturer, casting mold supplier, aluminum alloy casting mold)

Sítio Web Deste artigo: https://pt.zj-xinfeng.com/case/1564.html

Get a Custom Product Proposal Online

Please fill out the form below to receive this for free.

Global Hotline:

+86-15356852630,13967513266

Moldes para fundição por baixa pressão (LPDC) 
Moldes para fundição por gravidade 
Moldes para fundição por contrapressão (CPC) 
Moldes para fundição de peças estruturais
Molde para fundição de cubos de roda de motocicleta
Molde para fundição por pressão diferencial de cubos de roda
Molde para fundição por gravidade de cubos de roda
Molde para fundição por baixa pressão de cubos de roda

MOLDES PARA JANTES AUTOMÓVEIS 
PEÇAS ESTRUTURAIS AUTOMÓVEIS 
OUTROS COMPONENTES DE FUNDIDOS DE ALUMÍNIO

NOTÍCIAS DA EMPRESA
NOTÍCIAS DO SETOR
BLOG TÉCNICO
PERGUNTAS FREQUENTES

PERFIL DA EMPRESA
ESTRUTURA ORGANIZACIONAL
HISTÓRICO DE DESENVOLVIMENTO
PROPRIEDADE INTELECTUAL
ESPÍRITO DE EQUIPA PARCEIRO

Copyright © Zhejiang Xinfeng Machinery Co., Ltd. All Rights Reserved.