Moldes para fundição sob baixa pressão (LPDC)
Moldes para fundição por gravidade
Moldes de fundição por contrapressão (CPC)
Molde para fundição de peças estruturais
Molde de fundição para cubo de roda de motocicleta
Molde de fundição por pressão diferencial para cub
Molde para fundição por gravidade de cubos de roda
Baixa pressão no cubo da roda
The comparative conclusion is closer to reality in terms of module cost.
Adding an implicit cost column to the quotation comparison table provides a more complete decision-making basis.
Addendum: Four procurement strategies for domestic molds
Domestic molds can be made of imported steel of the same grade, and the price difference mainly comes from the processing and testing stages.
During bulk procurement, suppliers often provide spare parts and maintenance packages, resulting in lower overall costs.
For the first cooperation, it is recommended to conduct small-scale verification first and add orders after 3000 cycles.
Long term cooperation can agree on life assessment clauses, and settlement based on module is more secure.
Addendum 2: Three designs for comparative testing
Only when the same casting is trial produced separately on domestic and imported molds can the cost per piece be comparable.
Comparison should take into account the difference in scrap rate, where every 5 percentage points difference in scrap rate affects costs by approximately 8%.
It is recommended to have a trial production batch of no less than 500 pieces, as too few samples cannot reflect stability.
FAQ
How much cheaper are domestic molds? The same specifications are often 40% to 45% lower.
How much is the difference in lifespan? Domestic production accounts for approximately 90% to 95% of imports.
How many days is the delivery time difference? Domestic production takes 30 to 40 days, while imports take 45 to 60 days.
How long does it take for spare parts to respond? Domestic production takes about 7 to 15 days, while imports usually take 30 to 45 days.
When should I choose to import? High security level and large-scale projects.
How much can mixed procurement save? The overall cost has been reduced by approximately 25%.
Moldes para fundição por baixa pressão (LPDC)
Moldes para fundição por gravidade
Moldes para fundição por contrapressão (CPC)
Moldes para fundição de peças estruturais
Molde para fundição de cubos de roda de motocicleta
Molde para fundição por pressão diferencial de cubos de roda
Molde para fundição por gravidade de cubos de roda
Molde para fundição por baixa pressão de cubos de roda
MOLDES PARA JANTES AUTOMÓVEIS
PEÇAS ESTRUTURAIS AUTOMÓVEIS
OUTROS COMPONENTES DE FUNDIDOS DE ALUMÍNIO
PERFIL DA EMPRESA
ESTRUTURA ORGANIZACIONAL
HISTÓRICO DE DESENVOLVIMENTO
PROPRIEDADE INTELECTUAL
ESPÍRITO DE EQUIPA PARCEIRO
Copyright © Zhejiang Xinfeng Machinery Co., Ltd. All Rights Reserved.