Perguntas frequentes

Mexico undertakes North American production capacity, with mold procurement shifting towards LPDC as the main focus, and stricter compliance requirements for do

  • Vistas: ...
  • Tempo de liberação: 2026-11-16

Mexico undertakes North American production capacity, with mold procurement shifting towards LPDC as the main focus, and stricter compliance requirements for documents.

1、 Source of demand

Mexico's automotive parts production capacity is expanding, and the import value of aluminum alloy wheel casting molds and structural component molds continues to rise.

Customers are mostly foreign-funded factories or joint venture factories, and the decision-making chain includes local engineering and overseas headquarters.

Orders are often signed according to an annual framework, and molds are ordered in a rolling manner as the vehicle model iterates.

2、 Craftsmanship and Specifications

Local customers prefer LPDC low-voltage casting molds, with a typical cycle time requirement of 180 to 240 seconds.

The structural component project requires a flaw detection level of level two or above, and the porosity release line is mostly 2%.

The mold needs to match the North American press interface and safety regulations, and the drawing units and labeling habits need to be converted.

3、 Documents and Compliance

The delivery documents usually require material certification, three coordinate reports, trial mold records, and PPAP file packages.

Incomplete documents will prolong the acceptance period, usually taking an additional 7 to 10 days.

Some customers require suppliers to pass the quality management system audit and prepare materials in advance.

4、 Delivery and Logistics

Shipping to the west coast of Mexico takes about 20 to 25 days, and to the east coast takes about 25 to 30 days, which needs to be aligned with the production line.

The customs clearance documents include the certificate of origin and commercial invoice, and any missing items will result in demurrage charges.

Mold wooden boxes must meet fumigation or heat treatment requirements, otherwise they may be refused entry.

5、 Promotion suggestions

The bilingual content coverage of Spanish and English is wider, and the competition for Google's long tail keywords is moderate.

The focus of the content is on three types of requirements: "beat matching", "PPAP documents", and "nearshore delivery time".

Xinfeng provides a summary of operational points in Spanish along with the goods in the Mexico direction project.

Conclusion and Outlook

The threshold for the Mexican market lies in documentation and compliance, and price is usually not the determining factor.

The file package, interface matching, and bilingual materials are all complete, and the pass rate of the first acceptance has significantly improved.

Extension: Three pre confirmations for Mexican orders

Confirm the conversion caliber between American standard and metric system, and double label the cavity size.

Confirming the tonnage of the press and the size of the table, if the interface does not match, will delay debugging for more than 3 days.

Confirm the PPAP document list and submission time to avoid making up for it during the acceptance stage.

Three items will be confirmed during the quotation stage, and the probability of rework and replacement parts will be significantly reduced in the future.

Spanish abstracts can reduce the reading costs for local engineering teams.

The pre confirmation form is attached to the contract, and both parties have a more unified approach to execution.

Addendum: Three Practices Delivered by Mexico

It is recommended to label the drawings with double units to avoid a deviation of 0.3 millimeters when converting between the imperial and metric systems.

The quotation list includes testing items, which customers can use to verify whether the PPAP document list is complete.

Conduct a remote pre acceptance before delivery, and the on-site rectification time is usually reduced by about two days.

Addendum 2: Two time points for acceptance by the Mexican side

PPAP documents are usually submitted within two weeks after the first article is approved, and any delay may affect the approval for mass production.

Suggestions for mass production acceptance include specifying the sampling ratio for each batch to avoid inconsistent standards between batches.

FAQ

What is the mainstream craftsmanship in Mexico? LPDC is the main mode, with a tempo of 180 to 240 seconds.

What level of testing is required? Most structural components are of grade two or above.

What is the porosity release line? Mostly 2%.

Do you need PPAP file package? Usually required, including trial molds and testing records.

How long will the delay be if the files are incomplete? Acceptance usually takes an additional 7 to 10 days.

How long does it take to ship by sea to the west coast? About 20 to 25 days.

What are the requirements for wooden crates? Fumigation or heat treatment is required, otherwise it may be rejected.
Türkiye and the Middle East aluminum alloy casting mold market: maintenance convenience first

Sítio Web Deste artigo: https://pt.zj-xinfeng.com/case/1490.html

Get a Custom Product Proposal Online

Please fill out the form below to receive this for free.

Global Hotline:

+86-15356852630,13967513266

Moldes para fundição por baixa pressão (LPDC) 
Moldes para fundição por gravidade 
Moldes para fundição por contrapressão (CPC) 
Moldes para fundição de peças estruturais
Molde para fundição de cubos de roda de motocicleta
Molde para fundição por pressão diferencial de cubos de roda
Molde para fundição por gravidade de cubos de roda
Molde para fundição por baixa pressão de cubos de roda

MOLDES PARA JANTES AUTOMÓVEIS 
PEÇAS ESTRUTURAIS AUTOMÓVEIS 
OUTROS COMPONENTES DE FUNDIDOS DE ALUMÍNIO

NOTÍCIAS DA EMPRESA
NOTÍCIAS DO SETOR
BLOG TÉCNICO
PERGUNTAS FREQUENTES

PERFIL DA EMPRESA
ESTRUTURA ORGANIZACIONAL
HISTÓRICO DE DESENVOLVIMENTO
PROPRIEDADE INTELECTUAL
ESPÍRITO DE EQUIPA PARCEIRO

Copyright © Zhejiang Xinfeng Machinery Co., Ltd. All Rights Reserved.